Human Body Fluids Research Articles

The impact of the herbicide glyphosate and its metabolites AMPA and MPA on the metabolism and functions of human blood neutrophils and their sex-dependent effects on reactive oxygen species and CXCL8/IL-8 production

Significant levels of glyphosate, the world's most widely used herbicide, and its primary metabolites, AMPA and MPA, are detected in various human organs and body fluids, including blood. Several studies have associated the presence of glyphosate in humans with health problems, and effects on immune cells and their functions have been reported. However, the impact of this molecule and its metabolites on neutrophils, the most abundant leukocytes in the human bloodstream, is still poorly documented. We isolated neutrophils from human donor blood and investigated the effects of exposure to glyphosate, AMPA, and MPA on viability, energy metabolism, and essential antimicrobial functions in vitro. We observed that neutrophil viability was unaffected at the blood-relevant average concentrations of the general population and exposed workers, as well as at higher intoxication concentrations. Neutrophil energy metabolism was also not altered following exposure to the chemicals. However, while phagocytosis was unaffected, reactive oxygen species generation and CXCL8/IL-8 production were altered by exposure to the molecules. Alterations in function following exposure to glyphosate and metabolites differed according to the sex of the donors, which could be linked to glyphosate's known role as an endocrine disruptor. While ROS generation was increased in both sexes, male neutrophils exposed to glyphosate had increased intracellular production of CXCL8/IL-8, with no effect on female neutrophils. Conversely, exposure to the metabolites AMPA and MPA decreased extracellular production of this chemokine only in female neutrophils, with MPA also increasing intracellular production in male cells exposed to the chemoattractant N-formyl-methionine-leucyl-phenylalanine. Our study highlights the effects of glyphosate and its metabolites on the antimicrobial functions of neutrophils, which could be associated with health problems as future studies provide a better understanding of the risks associated with glyphosate use. Advances in knowledge will enable better and potentially stricter regulations to protect the public.

Nanomaterials Based on 2,7,12,17-Tetra-tert-butyl-5,10,15,20-tetraaza-21H,23H-porphine Exhibiting Bifunctional Sensitivity for Monitoring Chloramphenicol and Co2.

Monitoring antibiotic retention in human body fluids after treatment and controlling heavy metal content in water are important requirements for a healthy society. Therefore, the approach proposed in this study is based on developing new optical sensors using porphyrin or its bifunctional hybrid materials made with AuNPs to accomplish the accurate detection of chloramphenicol and cobalt. To produce the new optical chloramphenicol sensors, 2,7,12,17-tetra-tert-butyl-5,10,15,20-tetraaza-21H,23H-porphine (TBAP) was used, both alone in an acid medium and as a hybrid material with AuNPs in a water-DMSO acidified environment. The same hybrid material in the unchanged water-DMSO medium was the sensing material used for Co2+ monitoring. The best results of the hybrid materials were explained by the synergistic effects between the TBAP azaporphyrin and AuNPs. Chloramphenicol was accurately detected in the range of concentrations between 3.58 × 10-6 M and 3.37 × 10-5 M, and the same hybrid material quantified Co2+ in the concentration range of 8.92 × 10-5 M-1.77 × 10-4 M. In addition, we proved that AuNPs can be used for the detection of azaporphyrin (from 2.66 × 10-5 M to 3.29 × 10-4 M), making them a useful tool to monitor porphyrin retention after cancer imaging procedures or in porphyria disease. In conclusion, we harnessed the multifunctionality of this azaporphyrin and of its newly obtained AuNP plasmonic hybrids to detect chloramphenicol and Co2+ quickly, simply, and with high precision.

Mass spectrometry-based proteomic analysis of biological stains identifies body fluids specific markers

The identification of biological stains and their tissue resource is an important part of forensic research. Current methods suffer from several limitations including poor sensitivity and specificity, trace samples, and sample destruction. In this study, we profiled the proteomes of menstrual blood, peripheral blood, saliva, semen, and vaginal fluid with mass spectrometry technology. Tissue-enhanced and tissue-specific proteins of each group have been proposed as potential biomarkers. These candidate proteins were further annotated and screened through the combination with the Human Protein Atlas database. Our data not only validates the protein biomarkers reported in previous studies but also identifies novel candidate biomarkers for human body fluids. These candidates lay the foundation for the development of rapid and specific forensic examination methods.

One-drop micro-array towards accelerated optical quantification of dopamine in human biofluids using triangular silver nanoparticles: Smartphone-assisted biomedical analysis by colorimetric sensing and Lab-on-paper technology

Trace-level detection of Dopamine (DA) in human body fluids is crucial for diagnosing neurological disorders, understanding mental health, and advancing drug discovery, but found challenging with rapid and low-cost detection technologies. Herein, an innovative paper-based photochemical method has been developed for the detection of DA using triangular silver nanoprism (AgNPrs), as an optical nanoprobe, in human blood plasma and urine samples. The redox reaction between DA and AgNPrs was evaluated through a color change at two pHs (5.35and 6.14), which can be analyzed by UV–Vis spectrophotometry and microfluidic paper-based colorimetric device (µPCD) with low limit of quantification of 0.01 µM. This study presents pioneering work with the potential to inspire the development of simple and effective on-site semi quantifying recognition devices for other neurotransmitters, requiring only a lightweight piece of paper and a single drop of the necessary reagent.

Enhanced split-type photoelectrochemical aptasensor incorporating a robust antifouling coating derived from four-armed polyethylene glycol

Antifouling biosensors capable of preventing protein nonspecific adhesion in real human bodily fluids are highly sought-after for precise disease diagnosis and treatment. In this context, an enhanced split-type photoelectrochemical (PEC) aptasensor was developed incorporating a four-armed polyethylene glycol (4A-PEG) to construct a robust antifouling coating, enabling accurate and sensitive bioanalysis. The split-type PEC system involved the photoelectrode and the biocathode, effectively separating signal converter with biorecogniton events. Specifically, the TiO2 electrode underwent sequential modification with ZnIn2S4 (ZIS) and polydopamine (PDA) to form the PDA/ZIS/TiO2 photoelectrode. The cathode substrate was synthesized as a hybrid of N-doped graphene loaded with Pt nanoparticles (NG-Pt), and subsequently modified with 4A-PEG to establish a robust antifouling coating. Following the anchoring of probe DNA (pDNA) on the 4A-PEG-grafted antifouling coating, the biocathode for model target of cancer antigen 125 (CA125) was obtained. Leveraging pronounced photocurrent output of the photoelectrode and commendable antifouling characteristics of the biocathode, the split-type PEC aptasensor showcased exceptional detection performances with high sensitivity, good selectivity, antifouling ability, and potential feasibility.

The Relevance, Predictability, and Utility of Annexin A5 for Human Physiopathology.

As an important functional protein molecule in the human body, human annexin A5 (hAnxA5) is widely found in human cells and body fluids. hAnxA5, the smallest type of annexin, performs a variety of biological functions by reversibly and specifically binding phosphatidylserine (PS) in a calcium-dependent manner and plays an important role in many human physiological and pathological processes. The free state hAnxA5 exists in the form of monomers and usually forms a polymer in a specific self-assembly manner when exerting biological activity. This review systematically discusses the current knowledge and understanding of hAnxA5 from three perspectives: physiopathological relevance, diagnostic value, and therapeutic utility. hAnxA5 affects the occurrence and development of many physiopathological processes. Moreover, hAnxA5 can be used independently or in combination as a biomarker of physiopathological phenomena for the diagnosis of certain diseases. Importantly, based on the properties of hAnxA5, many novel drug candidates have been designed and prepared for application in actual medical practice. However, there are also some gaps and shortcomings in hAnxA5 research. This in-depth study will not only expand the understanding of structural and functional relationships but also promote the application of hAnxA5 in the field of biomedicine.

The Concentration of Lactoferrin in Breast Milk Correlates with Maternal Body Mass Index and Parity.

Background: Lactoferrin (LF) is a multifunctional glycoprotein found in human milk and body fluids, which has been shown to play a vital role in regulating the immunity and supporting the intestinal health of infants. Aim: This study evaluated the association between maternal/parturient factors and LF concentration in the breast milk of Chinese mothers. Methods: 207 breast milk samples were collected from healthy mothers with in the first year of lactation. Maternal and parturient information was collected for these participants through questionnaires. The content of lactoferrin in breast milk was detected by liquid chromatography, and macronutrient concentration in breast milk was measured by human milk analyzer in only 109 samples. Results: Our findings demonstrated that the LF content was much higher within the first month of lactation than it was after that period (p < 0.05). When compared with normal and lean mothers, the LF content of obese mothers was considerably higher (p < 0.05). The parity and LF content showed a favorable correlation. The proportion of LF to total protein tended to decrease as lactation progressed. Protein, fat, dry matter, and energy content were significantly positively correlated with LF content (p < 0.001). Conclusion: Early breast milk tends to have a higher level of LF, and the change of LF concentration in breast milk is associated with the parity and body mass index of the mother.

In vitro degradation behavior of oriented microcellular poly(L-lactic acid) biomimetic materials

This paper investigated the static in vitro degradation behavior of poly(L-lactic acid) (PLLA)-oriented microcellular materials. The study compared the influence of different molecular chains and internal morphological structures on water penetration into the material. Also, the relationship between thse self-accelerated degradation caused by ester bond breakage and reduced material molecular weight and mechanical properties was explored. Furthermore, the mechanism behind the static in vitro degradation of oriented microcellular PLLA materials in simulated human body fluid was explored, laying the foundation for regulating the mechanical performance decline of oriented microcellular biomimetic bone repair materials to match specific bone healing periods.

Review for QSAR studies and drug design of selected heterocyclic nucleus of antitubercular drugs

This review article explores the pressing issue of drug-resistant strains of Mycobacterium tuberculosis, which have emerged due to the widespread and uncontrolled use of antibiotics in clinical settings over several decades. In response to this challenge, various methods have been developed for synthesizing new antitubercular compounds. Among these, the fragment-based drug discovery (FBDD) approach has shown promise as an effective strategy. One class of compounds that has exhibited significant potential in combating tuberculosis is 1,2-diazoles. The article discusses the importance of these compounds and their potential as future antitubercular drugs. Additionally, it delves into the various strategies employed in drug development, emphasizing the relevance and efficacy of FBDD. Analytical methods play a crucial role in characterizing antitubercular antibiotics, and the article highlights liquid chromatography and voltammetry as preferred techniques for determining these compounds. The redox (oxidation/reduction) properties of antituberculars make them amenable to analysis using electrochemical methods, with voltammetry being particularly suitable. Furthermore, the article underscores the significance of utilizing voltammetry for quantifying different categories of antibiotics in both dosage forms and human body fluids. The affordability of this method makes it particularly advantageous for developing countries, providing a cost-effective approach to monitor and assess the presence of antitubercular drugs. Overall, the review article offers valuable insights into the current strategies for addressing drug resistance in tuberculosis and highlights the potential of 1,2-diazoles as future antitubercular agents.

Distinguishing two distinct types of salivary extracellular vesicles: a potential tool for understanding their pathophysiological roles.

Extracellular vesicles (EVs), which are found in almost all cells and human body fluids, are currently being studied as a source of pathophysiological information. Previously, we demonstrated that at least two types of EVs can be isolated from human whole saliva (WS) using enzymatic activity of dipeptidyl peptidase IV (DPP IV) as a marker for differentiating the EV subsets. In the present study, EV fractions, termed EV-I 20 k-ppt and EV-II 100 k-ppt, were prepared by a combination of size-exclusion chromatography of improved condition and sequential centrifugation. The EV-I 20 k-ppt fraction contained medium/large EVs with a diameter of 100-1,000nm, including aminopeptidase N (APN), mucin 1, ezrin, and Annexin A1. EV-II 100 k-ppt contained small EVs with a diameter of 20-70nm, with DPP IV and CD9, programmed cell death 6-interacting protein, and tumor susceptibility gene 101 as characteristic proteins. Proteomic analyses also revealed distinctive repertoires of constituent proteins. Immunoprecipitation of several membrane proteins of the EVs with respective antibodies suggested their differential local membrane environment between the two types of salivary vesicles. Thus, we identified two distinctive types of EVs, one is APN/MUC1- rich EVs (EV-I, large/medium EVs) and the other is DPP IV/CD9-rich EVs (EV-II, small EVs). Furthermore, analysis of the binding of the EVs to coronavirus spike proteins showed that EV-II 100 k-ppt, but not EV-I 20 k-ppt, significantly bound to the spike protein of Middle East respiratory syndrome coronavirus (MERS-CoV). Finally, we developed a simple method to prepare two distinctive EVs from only 1mL of human WS using sequential immunoprecipitation. Elucidating the features and functions of these two types of salivary EVs may help us understand their pathophysiological roles in the oral cavity and gastrointestinal tract.

Extracellular vesicles: Messengers of allergic immune responses and novel therapeutic strategy.

Extracellular vesicles (EVs) are nanosized particles released by nearly every cell type across all kingdoms of life. As a result, EVs are ubiquitously present in various human body fluids. Composed of a lipid bilayer, EVs encapsulate proteins, nucleic acids, and metabolites, thus playing a crucial role in immunity, for example, by enabling intercellular communication. More recently, there has been increasing evidence that EVs can also act as key regulators of allergic immune responses. Their ability to facilitate cell-to-cell contact and to transport a variety of different biomolecules enables active modulation of both innate and adaptive immune processes associated with allergic reactions. A comprehensive understanding of the intricate mechanisms underlying the interactions among allergens, immune cells, and EVs is imperative to develop innovative strategies for controlling allergic responses. This review highlights the recent roles of host cell- and bacteria-derived EVs in allergic diseases, presenting experimental and clinical evidence that underscores their significance. Additionally, the therapeutic potential of EVs in allergy management is outlined, along with the challenges associated with targeted delivery and cargo stability for clinical use. Optimization of EV composition and targeting strategies holds promise for advancing translational applications and establishing EVs as biomarkers or safe therapeutics for assessing allergic reactions. For these reasons, EVs represent a promising avenue for advancing both our understanding and management of allergic immune processes.

Click Conjugation of Zwitterionic Peptide with DNA Strand: An Efficient Antifouling Strategy for Versatile Photoelectrochemical Aptasensor.

Advanced antifouling biosensors have garnered considerable attention for their potential for precise and sensitive analysis in complex human bodily fluids. Herein, a pioneering approach was utilized to establish a robust and versatile photoelectrochemical aptasensor by conjugating a zwitterionic peptide with a DNA strand. Specifically, the branched zwitterionic peptide (BZP) was efficiently linked to complementary DNA (cDNA) through a click reaction, forming the BZP-cDNA conjugate. This intriguing conjugate exploited the BZP domain to create an antifouling biointerface, while the cDNA component facilitated subsequent hybridization with probe DNA (pDNA). To advance the development of the aptasensor, an upgraded PDA/HOF-101/ZnO ternary photoelectrode was designed as the signal converter for the modification of the BZP-cDNA conjugate, while a bipyridinium (MCEPy) molecule with strong electron-withdrawing properties was labeled at the front end of the pDNA to form the pDNA-MCEPy signal probe. Targeting the model of mucin-1, a remarkable enhancement in the photocurrent signal was achieved through exonuclease-I-aided target recycling. Such an engineered zwitterionic peptide-DNA conjugate surpasses the limitations imposed by conventional peptide-based sensing modes, exhibiting unique advantages such as versatility in design and capability for signal amplification.

Comprehensive multiscale analysis of lactate metabolic dynamics in vitro and in vivo using highly responsive biosensors.

As a key glycolytic metabolite, lactate has a central role in diverse physiological and pathological processes. However, comprehensive multiscale analysis of lactate metabolic dynamics in vitro and in vivo has remained an unsolved problem until now owing to the lack of a high-performance tool. We recently developed a series of genetically encoded fluorescent sensors for lactate, named FiLa, which illuminate lactate metabolism in cells, subcellular organelles, animals, and human serum and urine. In this protocol, we first describe the FiLa sensor-based strategies for real-time subcellular bioenergetic flux analysis by profiling the lactate metabolic response to different nutritional and pharmacological conditions, which provides a systematic-level view of cellular metabolic function at the subcellular scale for the first time. We also report detailed procedures for imaging lactate dynamics in live mice through a cell microcapsule system or recombinant adeno-associated virus and for the rapid and simple assay of lactate in human body fluids. This comprehensive multiscale metabolic analysis strategy may also be applied to other metabolite biosensors using various analytic platforms, further expanding its usability. The protocol is suited for users with expertise in biochemistry, molecular biology and cell biology. Typically, the preparation of FiLa-expressing cells or mice takes 2 days to 4 weeks, and live-cell and in vivo imaging can be performed within 1-2 hours. For the FiLa-based assay of body fluids, the whole measuring procedure generally takes ~1 min for one sample in a manual assay or ~3 min for 96 samples in an automatic microplate assay.

P288 Fecal leukocyte esterase level can predict endoscopic activity for Inflammatory Bowel Disease patients

Abstract Background The urine leukocyte esterase (LE) strip is widely employed to detect leukocyte presence in human body fluids due to its simplicity, speed, and cost-effectiveness. Our previous study demonstrated that fecal LE (FLE) correlated with fecal calprotectin (FC) which serves as a surrogate marker reflecting disease activity in inflammatory bowel disease (IBD) patients. This study aims to assess the correlation between FLE and endoscopy severity. Methods This prospective study included IBD patients at National Taiwan University Hospital from December 2021 to November 2023. FLE and FC in the same stool sample, which was collected within one month of endoscopy, were analyzed. The correlation between FLC, FC, and endoscopic severity scores was assessed using the Pearson method. Active disease in ulcerative colitis (UC) and Crohn's disease (CD) patients was defined as Mayo endoscopic score (MES) ≥ 2 and simple Endoscopic Score for Crohn's Disease (SESCD) ≥ 8, respectively. Sensitivity, specificity, positive and negative predictive values (PPV and NPV, respectively), and the Area Under the Receiver Operating Characteristic curve (AUROC) were analyzed by using SPSS. Results A total of 177 IBD patients (93 with UC, 84 with CD) were included. The correlation between FLE and FC levels was moderately positive (r=0.305, p&amp;lt;0.001). The correlation between FLE and endoscopic severity in UC and CD patients was 0.442 (p&amp;lt;0.001) and 0.293 (p=0.007), respectively. Among UC patients, the area under the receiver operating characteristic curve (AUROC) for predicting MES ≥ 2 by FLE and FC was 0.717 and 0.787 (p=0.241), with an optimal cutoff of 2+ for FLE and 42.5 mg/kg for FC, respectively. At this cutoff point, FLE demonstrated a sensitivity, specificity, positive predictive value (PPV), and negative predictive value (NPV) for predicting MES ≥ 2 as 52.3%, 81.6%, 71.8%, and 65.6%, respectively. For CD patients, the AUROC for predicting SESCD ≥ 8 by FLE and FC was 0.761 and 0.869 (p=0.203), with an optimal cutoff of 2+ for FLE and 225 mg/kg for FC, respectively. FLE exhibited a sensitivity, specificity, PPV, and NPV of 81.8%, 64.4%, 74.3%, and 95.9% for predicting SESCD ≥8 respectively, at this cutoff. Conclusion Our results demonstrated that FLE can predict endoscopic activity, which is a cheaper and widely available monitoring tool, might be an alternative choice to FC for IBD monitoring.

Measurements of cadmium levels in relation to tobacco dependence and as a function of cytisine administration

Cigarette smoking delivers a number of heavy metals, including cadmium (Cd), into the body. Bioaccumulation may result in an increase in pathological consequences over time. The assessment of changes in serum Cd concentrations during the treatment of cigarette dependence with cytisine was performed for the first time. Parameters assessing smoking habits, strength of addiction, and effectiveness of therapy were analyzed. Cd was determined before, during, and after the end of treatment. The serum Cd levels were significantly higher in the smokers than in the nonsmokers. Significant differences in Cd concentrations between sampling times in smokers were observed. Individuals who stopped smoking had significantly lower Cd concentrations compared to baseline. A significant positive correlation between the serum Cd before treatment and smoking urges was also obtained. Additionally, salivary Cd determinations were performed before treatment to evaluate the use of this method to assess cigarette addiction. Our findings indicate that Cd can be used as a biomarker of smoking addiction, and provide an alternative assessment of tobacco smoke exposure to other methods. The results provide new knowledge related to Cd concentrations in human body fluids and may play a role in monitoring and assessing the efficacy of cytisine for smoking cessation.

Release Control of Biologically Active Substances from Simulation Model of Silicone Liners

Introduction. In modern medicine, the requirements for the quality of used materials are getting stricter. There is serious concern about bacterial and fungal contamination related to the use of silicone polymeric products, especially those that are in direct contact with human tissues and body fluids. In this regard, the issue of impregnating silicone medical products with various biologically active substances (BAS), particularly with antimicrobial properties, appears relevant.Aim. The research studies the relevance of adding BAS into silicone medical devices to improve their quality and prevent negative consequences of their use. The authors of the article aimed at proving prolonged release of the chosen BAS from silicone products during their contact with skin and the bacteriostatic effect emerging as a result of the BAS release. That required verifying the existence of BAS in the washouts from silicone disks, which, in turn, proves the fact that BAS initially distributed evenly in the volume of a silicone disk are capable of diffusing to the surface and then releasing from it under mechanical action, as well as when treating it with alcohol or alcohol-containing solutions.Materials and methods. Symdiol and bisabolol were selected as the BAS for this study due to their proved antibacterial, anti-inflammatory and moisturizing properties. Bisabolol and symdiol were used in the form of Dragosantol 100 and SymDiol 68T preparations correspondingly. Silicone disks (SDs), impregnated with BAS (0,2 % of the volume) were used as a simulation model of silicone liners. The BAS release from silicone liner models was assessed using highly sensitive chromatographic methods of thin-layer and gas-liquid chromatography.Results and discussion. The method of impregnating SDs with BAS was worked out, the optimal concentration of these substances to add them into the silicone base was selected. The release of the impregnated additives, as well as prolonged stable releasing effect, were confirmed. The data obtained during the experiment allows saying with confidence that the impregnated preparation (symdiol and bisabolol) releases from a SD even upon short and low-intensity mechanical contact with skin, which produces stable bacteriostatic effect on a wide range of microorganisms. The process of BAS release from SDs is also facilitated when treating the product periodically with alcohol-containing solutions, which is necessary according to the operating rules. The obtained results of the chromatographic research quite correlate with the data of the previous microbiological experiments regarding the studied topic. Release of the studied BAS from polymer products during their contact with the skin within the period of not less than 3 months justifies feasibility of adding these BAS into the silicone base.Conclusions. The study confirmed the release of biologically active substances from silicone medical products. Adding BAS into silicone liners undoubtedly improves the quality of these medical products, which can be applied in prosthetics and orthoses.

Comparison of binding sites and affinity of flavonol–Cu(II) complexes with the same parent nucleus: Synthesis, DFT prediction, and coordination pattern

This study explores the coordination dynamics between dietary polyphenols, specifically kaempferol, quercetin, and myricetin, and Cu ions in aqueous environments. A novel synthesis method for flavonol–Cu(II) coordination compounds is introduced, effectively reducing interference from free metal ions. Our results reveal consistent binding patterns of Cu ions with flavonols (2:1 ratio of flavonol to Cu(II)), predominantly at the 4,5 sites. Various analytical techniques are used to validate these coordination ratios and sites. The binding affinity of the flavonols for Cu ions follows a descending sequence: myricetin > quercetin > kaempferol. Notably, coordination with Cu ions enhances the free-radical scavenging activities of these flavonols. These findings hold substantial importance for food chemistry, biology, and medicine, providing crucial insights into the way dietary flavonols form stable structures in environments similar to human body fluids and their interactions with metal ions, opening new possibilities for their application and understanding in diverse scientific domains.

Two novel phages, Klebsiella phage GADU21 and Escherichia phage GADU22, from the urine samples of patients with urinary tract infection.

Phages are found in a wide variety of places where bacteria exist including body fluids. The aim of the present study was to isolate phages from the urine samples of patients with urinary tract infection. The 10 urine samples were cultured to isolate bacteria and also used as phage sources against the isolated bacteria. From 10 urine samples with positive cultures, 3 phages were isolated (33%) and two of them were further studied. The Klebsiella phage GADU21 and Escherichia phage GADU22 phages infected Klebsiella pneumonia and Escherichia coli, respectively. Among the tested 14 species for host range analysis, the Klebsiella phage GADU21 was able to infect two species which are Klebsiella pneumonia and Proteus mirabilis, and Escherichia phage GADU22 was able to infect four species which are Shigella flexneri, Shigella sonnei and Escherichia coli. Among different isolates of the indicator bacteria for each phage, GADU21 infected half of the tested 20 Klebsiella pneumonia isolates while GADU22 infected 85% of the tested 20 E. coli isolates. The genome sizes and GC ratios were 75,968bp and 44.4%, and 168,023bp and 35.3% for GADU21 and GADU22, respectively. GADU21 and GADU22 were both lytic and had no antibiotic resistance and virulence genes. GADU21 was homologue with Klebsiella phage vB_KpP_FBKp27 but only 88% of the genome was covered by this phage. The non-covered parts of the GADU21 genome included genes for tail-fiber-proteins and HNH-endonuclease. GADU22 had 94.8% homology with Escherichia phage vB_Eco_OMNI12 and had genes for immunity proteins. Phylogenetic analysis showed GADU21 and GADU22 were members of Schitoviridae family and Efbeekayvirus genus and Straboviridae family and Tevenvirinae genus, respectively. VIRIDIC analysis classified these phages in new species clusters. Our study demonstrated the possibility to use infected body fluids as phage sources to isolate novel phages. GADU21 is the first reported Klebsiella phage isolated from human body fluid. The absence of virulence and antibiotic resistance genes in their genomes makes the phages a potential therapeutic tool against infections.

Corrosion and Wear Behavior of Additively Manufactured Metallic Parts in Biomedical Applications

Today, parts made by additive manufacturing (AM) methods have found many applications in the medical industry, the main reasons for which are the ability to custom design and manufacture complex structures, their short production cycle, their ease of utilization, and on-site fabrication, leading to the fabrication of next-generation intricate patient-specific biomedical implants. These parts should fulfill numerous requirements, such as having acceptable mechanical strength, biocompatibility, satisfactory surface characteristics, and excellent corrosion and wear performance. It was known that AM techniques may lead to some uncertainties influencing part properties and causing significant evaluation conflicts in corrosion outcomes. Meanwhile, the corrosion and wear behavior of additively manufactured materials are not comprehensively discussed. In this regard, the present work is a review of the state-of-the-art knowledge dedicated to reviewing the actual scientific knowledge about the corrosion and wear response of additively manufactured biomedical components, elucidating the relevant mechanism and influential factors to enhance the performance of AM-manufactured implants specifically for the physiological human body fluids. Furthermore, there is a focus on the use of reinforced composites, surface engineering, and a preparation stage that can considerably affect the tribocorrosion behavior of AM-produced parts. The improvement of tribocorrosion performance can have a key role in the production of advanced AM implants and the present study can pave the way toward facile production of high-throughput AM biomedical parts that have very high resistance to corrosion and wear.

Application of Response Surface Methodology Experimental Design to Optimize Tribological Lubrication Characteristics

Total Knee Replacement (TKR) has become a standard operation for patients with joint disorders. Despite the fact that the number of procedures is increasing all the time, the short service life of implants remains a persistent concern for researchers. Understanding lubrication may aid in explaining tribological processes that lead to replacements that last well into the third decade of service. Likewise, wear and friction in total knee replacement (TKR) components are among the most common causes of implant failure. As a result, this study will evaluate the feasibility of using the polymer Polylactic Acid (PLA) for cartilage replacement in Total Knee Replacement (TKR) using plant-based oils as lubricants. Furthermore, the modifier will be added to plant-based oils as an additive to make them analogous to human bodily fluids. The present paper is applying the Box-Behnken design to optimize the performance and mechanical responses of bio-lubricants toward Polylactic Acid (PLA) as a tibial insert for cartilage replacement in Total Knee Replacement (TKR). The main objective of this paper is to develop an optimized method for the selection of plant-based oil parameters using Response Surface Methodology (RSM). A three-level three-factor Box-Behnken design (BBD) was used to investigate the interactions between the essential factors comprising load (45 kg to 90 kg), speed (60 rpm, 90 rpm and 360 rpm), and concentration (0ml, 5ml and 10ml) of bio-lubricants to accomplish the indicated prospect of using polymer for cartilage replacement. Canola oil, castor oil, and sunflower seed oil are considered vegetable oils, whereas Hyaluronic Acid (HA) is the friction modifier. The parameters are used to create a Box-Behnken design for predicting lubricant anti-wear qualities stated in terms of coefficient of friction, wear rate and frictional force as determined by the pin-on-disk experimental procedure. As a result, the optimization using RSM successfully interpreted the experimental data, according to the analysis of variance, with coefficients of determination of R2 = 0.91 and adjusted R2 = 0.77. The Coefficient of Friction (CoF) and wear rate were investigated following tribological testing. Castor oil had a lower coefficient of friction than canola and sunflower seed oil, according to the findings. In terms of friction reduction, castor oil surpasses canola and sunflower seed oil.